desi3933
06-20 05:24 PM
This is a very valid point. If employer or his lawyer asks more money in fees for filing I485 it is always better to go thro employer if he files I485 promptly. But if the delay is intention of the employer then use your own Lawyer.
USCIS can deny I-485 application if it is missing "initial evidence". In this case it is approved & active I-140 and Employment Verification Letter from GC Employer.
Also, the USCIS published a new rule that allows the USCIS to have more discretion over shortening of the time frame for responses to RFE from previous 12 weeks to any period of time which they see fit.
Google for USCIS Announces Flexible Response Times
USCIS can deny I-485 application if it is missing "initial evidence". In this case it is approved & active I-140 and Employment Verification Letter from GC Employer.
Also, the USCIS published a new rule that allows the USCIS to have more discretion over shortening of the time frame for responses to RFE from previous 12 weeks to any period of time which they see fit.
Google for USCIS Announces Flexible Response Times
wallpaper russell peters quotes. and buy
andy garcia
12-30 01:04 PM
Longq,
Are these info are based on good guess? If not, can you provide us some link, or attach jpg with highlighting relevent facts.
From November 2005 Visa Bulletin
HOW IS THE EMPLOYMENT-BASED PER-COUNTRY LIMIT CALCULATED?
Section 201 of the INA sets an annual minimum Family-sponsored preference limit of 226,000, while the worldwide annual level for Employment-based preference immigrants is at least 140,000. Section 202 sets the per-country limit for preference immigrants at 7% of the total annual Family-sponsored and Employment-based preference limits, i.e. a minimum of 25,620.
* The annual per-country limitation of 7% is a cap, meaning visa issuances to any single country may not exceed this figure. This limitation is not a quota to which any particular country is entitled, however. The per-country limitation serves to avoid monopolization of virtually all the visa numbers by applicants from only a few countries.
* In recent years, the application of the rules outlined in AC21 has allowed countries such as China � mainland born, India, and the Philippines to utilize large amounts of employment numbers which would have otherwise gone unused.
* During FY due to anticipated heavy demand, the AC21 provisions are not expected to apply, and the amount of Employment numbers available to any single country will be subject to the 7% cap. It is anticipated that the addition of unused FY-2005 Family numbers and the remaining AC21 numbers to the 140,000 annual minimum will result in an FY-2006 annual Employment limit of 152,000. This will mean an Employment per-country limit for FY-2006 of approximately 10,650.
* To illustrate the effect of the reduced per-county limitation during FY-2006 on the oversubscribed countries, it should be noted that during FY-2005 India used approximately 47,175 Employment numbers.
Are these info are based on good guess? If not, can you provide us some link, or attach jpg with highlighting relevent facts.
From November 2005 Visa Bulletin
HOW IS THE EMPLOYMENT-BASED PER-COUNTRY LIMIT CALCULATED?
Section 201 of the INA sets an annual minimum Family-sponsored preference limit of 226,000, while the worldwide annual level for Employment-based preference immigrants is at least 140,000. Section 202 sets the per-country limit for preference immigrants at 7% of the total annual Family-sponsored and Employment-based preference limits, i.e. a minimum of 25,620.
* The annual per-country limitation of 7% is a cap, meaning visa issuances to any single country may not exceed this figure. This limitation is not a quota to which any particular country is entitled, however. The per-country limitation serves to avoid monopolization of virtually all the visa numbers by applicants from only a few countries.
* In recent years, the application of the rules outlined in AC21 has allowed countries such as China � mainland born, India, and the Philippines to utilize large amounts of employment numbers which would have otherwise gone unused.
* During FY due to anticipated heavy demand, the AC21 provisions are not expected to apply, and the amount of Employment numbers available to any single country will be subject to the 7% cap. It is anticipated that the addition of unused FY-2005 Family numbers and the remaining AC21 numbers to the 140,000 annual minimum will result in an FY-2006 annual Employment limit of 152,000. This will mean an Employment per-country limit for FY-2006 of approximately 10,650.
* To illustrate the effect of the reduced per-county limitation during FY-2006 on the oversubscribed countries, it should be noted that during FY-2005 India used approximately 47,175 Employment numbers.
chanduv23
08-14 05:21 AM
This is called OBSSESSIVE COMPULSIVE DISORDER
2011 wallpaper russell peters
mdforgc
02-21 05:01 AM
I wonder if this person who did all this posting without reading what is posted on the site and wasted the valuable time of IV volunteers from an anti immigration group? Please do not get distracteed guys and all those people sitting ont he edge, join in and act!!
more...
wonderlust
09-27 04:28 PM
Early Sept. I finally got July 2nd filing receipt. I realized that my packet has traveled all the way to CA and then back again at NSC!! then last weekend Sept 15, I got an email notice that my case is back at NSC AFTER I have received a hard copy notice about the transfer...
It's a confusing process and I don't know which center is faster...
Wonderlust
Based on my receipt numbers and looking up on USCIS website, it appears my AOS application that was sent to NSC has been sent to California Center. I have not seen anybody's case being sent to CSC. Dunno how good or bad it is and whether it sppeds up/delays my EAD processing. Anybody had experience with CSC and got any of EAD/AP/GC approved from CSC.
It's a confusing process and I don't know which center is faster...
Wonderlust
Based on my receipt numbers and looking up on USCIS website, it appears my AOS application that was sent to NSC has been sent to California Center. I have not seen anybody's case being sent to CSC. Dunno how good or bad it is and whether it sppeds up/delays my EAD processing. Anybody had experience with CSC and got any of EAD/AP/GC approved from CSC.
willwin
02-19 12:11 PM
I do not get it.
As far as I know, a CP applicant can always switch over to AOS if already inside the US. It is harder for an AOS applicant to switch to CP.
You will have to make a choice. Do you want the benefits of CP or AOS? The way things are presently, you cannot have both. So pick one.
But the PD has to be current to switch over.
As far as I know, a CP applicant can always switch over to AOS if already inside the US. It is harder for an AOS applicant to switch to CP.
You will have to make a choice. Do you want the benefits of CP or AOS? The way things are presently, you cannot have both. So pick one.
But the PD has to be current to switch over.
more...
ken
09-29 11:48 PM
I opted for renewing the AP online on Sept 22,2009.Got the receipt at the same time, and next day which is Sept 23 i sent the supporting documents along with the cover letter,2 photographs ,confirmation receipt ,485 receipt, DL copy and passport copy from Priority Mail with delivery confirmation. Today when I tried to check the status on postal website it says that document scanned on Sept 23 which means they haven't reached the destination, now this concerns me because previously when ever I applied AP and sent the supporting documents they normally take 2 to 3 business days to reach.
Now my question:
1) If suppose the AP supporting documents get lost in mail then can I send the documents again and if in the mean time postal service delivers the first set
In between I see soft LUD's of 9/28 on my wife AP
All responses to the above matter is highly appreciated
Posted the same information here
http://immigrationvoice.org/forum/forum76-travel-out-of-country-and-re-entry-during-after-485-filing/538306-strange-situation-with-ap-renewal-at-tsc.html#post995560
Now my question:
1) If suppose the AP supporting documents get lost in mail then can I send the documents again and if in the mean time postal service delivers the first set
In between I see soft LUD's of 9/28 on my wife AP
All responses to the above matter is highly appreciated
Posted the same information here
http://immigrationvoice.org/forum/forum76-travel-out-of-country-and-re-entry-during-after-485-filing/538306-strange-situation-with-ap-renewal-at-tsc.html#post995560
2010 russell peters quotes.
smartboy75
08-06 11:59 AM
Count me in... I am in the same boat and to top it all the NSC CSR says that my case is in extended review...whatever the hell it means....
My Details...
EB2 - India
PD:May 22, 2004
I140 Approval: Mar 17, 2007
RD: Aug 09, 2007
ND: Sept 19, 2007
Service Centre: NSC
My Details...
EB2 - India
PD:May 22, 2004
I140 Approval: Mar 17, 2007
RD: Aug 09, 2007
ND: Sept 19, 2007
Service Centre: NSC
more...
nozerd
01-13 05:05 PM
Tired of waiting ( PD: August 2001) I finally wrote to both my local congressman and Senator today. My senator is on senate Immigration commitee so lets see what happens. Hopefully something will move.
If this doesnt help I will try Ombudsman next after couple of months. The Ombudsman form has a question of if you have tried through Congressman etc first so we can try and see that.
Guys its so funny when you see ppl with PD of 2003 and 2005 complaining and bitching. Here we have waited 7 + yrs our PD's are current and we are doing OK. Wait sure brings maturity :)
If this doesnt help I will try Ombudsman next after couple of months. The Ombudsman form has a question of if you have tried through Congressman etc first so we can try and see that.
Guys its so funny when you see ppl with PD of 2003 and 2005 complaining and bitching. Here we have waited 7 + yrs our PD's are current and we are doing OK. Wait sure brings maturity :)
hair russell peters quotes.
ram77
05-31 12:00 PM
Thanks for the post.
more...
kiran_k02
08-06 11:09 PM
PD: July 2004
RD: July 03 2007
ND: Sept 13 2007
140 Approved: May 07
485 Pending: NSC
name checking: pending (got to know with Recent infopass appointment)
I got hold of IO this morning using POJ method. She said, my case has been assigned to IO.
Hello myvoice23 ---
How come your case is assigned to IO inspite of pending NC. I saw a post which said that NC should be cleared before 485 approval. They are planning to finish NC by Feb, 09; for all applicants whose NC is pending for than 6 months.
I am stuck with NC...my PD is 09/2004...
Kiran
RD: July 03 2007
ND: Sept 13 2007
140 Approved: May 07
485 Pending: NSC
name checking: pending (got to know with Recent infopass appointment)
I got hold of IO this morning using POJ method. She said, my case has been assigned to IO.
Hello myvoice23 ---
How come your case is assigned to IO inspite of pending NC. I saw a post which said that NC should be cleared before 485 approval. They are planning to finish NC by Feb, 09; for all applicants whose NC is pending for than 6 months.
I am stuck with NC...my PD is 09/2004...
Kiran
hot russell peters quotes.
shana04
02-12 04:05 PM
Thanks Shana04.
Can you pls mail me your contact details as i would like to talk to you for a while..if it's fine with you.. my email id is rameshk75@gmail.com
Ramesh,
PM your phone number, I will call you.
Can you pls mail me your contact details as i would like to talk to you for a while..if it's fine with you.. my email id is rameshk75@gmail.com
Ramesh,
PM your phone number, I will call you.
more...
house comedian Russell Peters
user1205
01-11 02:25 PM
^^^^^
tattoo russell peters girlfriend
go_guy123
12-20 03:13 PM
Was this is a change in the procedures of USCIS? If yes, could we not request them to increase the length of the EAD from 1 to 5 years? This will help many of us too. I need to get my DL renewed every year along with the EAD.
Well there was court case related what constitues the 6 years where court said that only period of stay on H1b in US (so period of stay outside US on H1b) doesnt count.
So the law didnt change its the interpreation of law that was changed by the court case.
Same logic goes with H4 (they dont work on H1B ) so it was a matter of time someone would also challenge that on court and win.
uscis decided to do that based on the interpreation of course case
http://www.murthy.com/news/n_aaoall.html
Based one that even this one could have been challenged.
Well there was court case related what constitues the 6 years where court said that only period of stay on H1b in US (so period of stay outside US on H1b) doesnt count.
So the law didnt change its the interpreation of law that was changed by the court case.
Same logic goes with H4 (they dont work on H1B ) so it was a matter of time someone would also challenge that on court and win.
uscis decided to do that based on the interpreation of course case
http://www.murthy.com/news/n_aaoall.html
Based one that even this one could have been challenged.
more...
pictures Russell Peters Pre-sale
ss1026
08-20 06:34 PM
If i get correctly...Labour Substitutionhas been banned..right???
DOL has ended Labor subsitution since July 16 of this year.
DOL has ended Labor subsitution since July 16 of this year.
dresses Russell Peters: An Open Book; russell peters quotes. sometimes Russell
hydboy77
06-10 07:42 PM
You are the first guy who wrote a sensible post regarding CIR. Most if not all people here are delusional when it comes to CIR. I don’t trust Obama and Durbin to do any justice for Eb immigrants. The democrats agenda was always the illegals, as far as we EB are concerned they would prefer that we just get kicked out through endless RFE harassment from USCIS. The fact is republicans don’t like non whites to immigrate to US and the democrats are color blind to most extent but they are class conscious, they like illegals and poor people to immigrate to US because they can control them whereas they cannot control and herd the EB immigrants. So when the negotiations for CIR start Republicans will oppose any immigration so the democrats will strike a bargain with the republicans where they will ask for amnesty for illegals and in return they will happily throw the EB community under the bus by saying they are "reforming" the US immigration system by introducing a points based system where even existing applicants like the EB folks who have been in US for the last 10+ years have to re apply in points based nonsense system. Before people get angry ask yourself this question
1. Was there a visa recapture in the last CIR (don’t confuse with the first CIR which was passed by Arlen Specter which was the best CIR, it had visa recapture, it had STEM exemption)
2. Did it have Stem exemption i.e. exempt people who earned a Master and PHD from American universities from yearly green card quota?
3. Did it eliminate country quota.
4. Did it at least give an amnesty\interim type green card deal to honest legal EB folks like they gave to illegals?
The unfortunate answer to all those is a "NO" and this was when the president was Bush a republican, now you have Obama as the president and Durbin as his right man in senate. Does anybody really expect Justice for EB from these two?
Having said this I am not saying lose hope and pack up your bags. We will all have to fight for our cause but don’t have unrealistic expectations from CIR. Our best bet is a non cir piece meal bill visa recapture bill that addresses EB issues seperate from CIR, it is difficult to get such a bill passed but the chances for such a bill are better then Obama-durbin cir
And yes. CIR....NO BODY knows the final form in which it will pass and what impact would it have on legal EB immigration....no way to tell. I have no basis to say this but this is just my personal opinion: For all of us on this forum going through immigration process; our best bet is to get something before CIR actually passes and comes in to the play....I do not have good feeling about CIR.
1. Was there a visa recapture in the last CIR (don’t confuse with the first CIR which was passed by Arlen Specter which was the best CIR, it had visa recapture, it had STEM exemption)
2. Did it have Stem exemption i.e. exempt people who earned a Master and PHD from American universities from yearly green card quota?
3. Did it eliminate country quota.
4. Did it at least give an amnesty\interim type green card deal to honest legal EB folks like they gave to illegals?
The unfortunate answer to all those is a "NO" and this was when the president was Bush a republican, now you have Obama as the president and Durbin as his right man in senate. Does anybody really expect Justice for EB from these two?
Having said this I am not saying lose hope and pack up your bags. We will all have to fight for our cause but don’t have unrealistic expectations from CIR. Our best bet is a non cir piece meal bill visa recapture bill that addresses EB issues seperate from CIR, it is difficult to get such a bill passed but the chances for such a bill are better then Obama-durbin cir
And yes. CIR....NO BODY knows the final form in which it will pass and what impact would it have on legal EB immigration....no way to tell. I have no basis to say this but this is just my personal opinion: For all of us on this forum going through immigration process; our best bet is to get something before CIR actually passes and comes in to the play....I do not have good feeling about CIR.
more...
makeup quotes; russell peters quotes. bob marley quotes; bob marley quotes
snathan
04-19 12:06 PM
They do not accept Indian 3 yr bachelors & 2/3years of Masters + 5 years for EB2. This has been discussed lot of times. They expect single 4 year degree.
15yrs of education(India Bachelors) + 5 or more years of education for EB3 is accepted if certain qualifiers are included in the Labor.
Just take care if you are dealing with attorney who saying above thing.
It all depends on what you have in the PERM requirement. If you have like MS, BS or any foreign equivalent as evaluated by reputed firm or equivalent experience then you can get approval
.
15yrs of education(India Bachelors) + 5 or more years of education for EB3 is accepted if certain qualifiers are included in the Labor.
Just take care if you are dealing with attorney who saying above thing.
It all depends on what you have in the PERM requirement. If you have like MS, BS or any foreign equivalent as evaluated by reputed firm or equivalent experience then you can get approval
.
girlfriend Russell Peters has set up a
alterego
07-25 01:31 PM
I hate to say it but this is starting to sound very much like an Alcoholics anonymous support group session. LOL.
Let me jump right in!
Get a grip guys. Life is not so bad. What you guys are worrying about is relatively trivial. The odds are heavily stacked in your favor for you to get the green card eventually, most likely within 2 yrs. I can't fathom another 2 plus years with no legislative relief. In the mean time as long as you stick to AC21 rules, you should have the courage to move jobs. Heck, with EAD, you could even move into something part time and try it out before finally deciding to commit etc. My point is you have tremendous flexibility, enjoy that.
In the small chance things do not work out, then you have presumably had an opportunity to save enough to purchase a decent home in India(or wherever your home country may be), a car and your line of work(I'm referring to the predominantly IT folks here) is in such international demand that you will be able to earn a livable wage anywhere, including India.
And here is the real shocker to many of you. There are millions of Americans(probably well over half) who will trade their position in life with you in a heart beat given the privilege, family and social support system, education, world view and demand you are in. Sometimes it is hard to see how blessed you actually are in this world. That is why I have taken a very grim view of people who have compared their issue to slavery etc. That only speaks to their unawareness of that practice.
Now I know none of this is going to get you your green card tomorrow and improve your mistreatment in this needlessly ridiculous and tortuous green card journey. However I am hoping it atleast gives you some perspective.
Let me jump right in!
Get a grip guys. Life is not so bad. What you guys are worrying about is relatively trivial. The odds are heavily stacked in your favor for you to get the green card eventually, most likely within 2 yrs. I can't fathom another 2 plus years with no legislative relief. In the mean time as long as you stick to AC21 rules, you should have the courage to move jobs. Heck, with EAD, you could even move into something part time and try it out before finally deciding to commit etc. My point is you have tremendous flexibility, enjoy that.
In the small chance things do not work out, then you have presumably had an opportunity to save enough to purchase a decent home in India(or wherever your home country may be), a car and your line of work(I'm referring to the predominantly IT folks here) is in such international demand that you will be able to earn a livable wage anywhere, including India.
And here is the real shocker to many of you. There are millions of Americans(probably well over half) who will trade their position in life with you in a heart beat given the privilege, family and social support system, education, world view and demand you are in. Sometimes it is hard to see how blessed you actually are in this world. That is why I have taken a very grim view of people who have compared their issue to slavery etc. That only speaks to their unawareness of that practice.
Now I know none of this is going to get you your green card tomorrow and improve your mistreatment in this needlessly ridiculous and tortuous green card journey. However I am hoping it atleast gives you some perspective.
hairstyles russell peters quotes. cdsep
actaccord
01-31 08:56 AM
to find anything related to the patent in uspto.gov
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
aachoo
02-17 09:20 PM
another LUD today for me 02/17
What was your RFE for?
I am still waiting to see what my RFE was for.
I had another LUD today as well (2/17) (also had one on 2/10, 2/13). wife only had 2/10 and 2/13.
-a
What was your RFE for?
I am still waiting to see what my RFE was for.
I had another LUD today as well (2/17) (also had one on 2/10, 2/13). wife only had 2/10 and 2/13.
-a
pitha
12-29 11:37 PM
Can you or somebody tell me the nature of RFE that was issued after invoking AC21. Was it related to semilar/same job category or ability to pay or educational qualification etc etc.
Omm,
n2b,
I have seen many people in the forums getting RFE after invoking AC21. You know how USCIS works, right?? If they ever keep track of what they are doing and if they have a definite process in place, neither there will be any retrogression nor any of these forums. Be prepared for RFE if you are invoking AC21. Though you can survive that, imagine the period between receiving the RFE and responding to it. What if that happens in your 5th or 6th year of wait?? I pray that your wait is not that long.
Thanks
Omm,
n2b,
I have seen many people in the forums getting RFE after invoking AC21. You know how USCIS works, right?? If they ever keep track of what they are doing and if they have a definite process in place, neither there will be any retrogression nor any of these forums. Be prepared for RFE if you are invoking AC21. Though you can survive that, imagine the period between receiving the RFE and responding to it. What if that happens in your 5th or 6th year of wait?? I pray that your wait is not that long.
Thanks
Post a Comment